Analisis Pengaruh Penambahan Abu Tempurung Kelapa Terhadap Kuat Tekan Beton Geopolimer Dengan dan Tanpa Zat Tambah

Authors

  • Ferdi Sikanna Program Studi Teknik Sipil, Fakultas Teknik, Universitas Bosowa
  • Arman Setiawan Program Studi Teknik Sipil, Fakultas Teknik, Universitas Bosowa
  • Eka Yuniarto Program Studi Teknik Sipil, Fakultas Teknik, Universitas Bosowa

DOI:

https://doi.org/10.56326/jptsk.v3i3.3203

Keywords:

Abu Tempurung Kelapa, Superplastiizer, Beton Geopolimer

Abstract

This study aims to determine how the effect of adding coconut shell ash as a partial substitute for fly ash on the compressive strength of geopolymer concrete and the effect of adding and without adding additives to variations of coconut shell ash. The method of this research is to compare the control concrete with the variation of fly ash mixed with coconut shell ash 5%, 10%, 15%, with and without the addition of 2% superplastizer. From the results of this study it can be concluded that the concrete using 5% coconut shell ash increased by 3.7% from the control concrete, and at the addition of 10% and 15% coconut shell ash decreased the compressive strength of the concrete by 36% and 47, respectively. 5%. For the comparison of the addition of 2% superplastizer to the compressive strength of coconut shell ash geopolymer concrete without using additives of 7.8%, 23.4% and 16.8%, from each variation of coconut shell ash.

References

Habert, G., dkk. (2020). Environmental impacts and decarbonization strategies in the cement and concrete industries. Nature Reviews Earth & Environment, 1(11), 559–573. https://doi.org/10.1038/s43017-020-0093-3

Zawrah, M. F., Gado, R. A., & El-Kheshen, A. A. (2021). Valorization of fly ash waste for geopolymer production: influence of activator type on microstructure and properties. Ceramics International, 47(9), 13001–13010. https://doi.org/10.1016/j.ceramint.2020.11.218

Rovnaník, P., Bayer, P., & Kusák, I. (2021). Mechanical and microstructural properties of ambient-cured geopolymer composites reinforced with polypropylene fibers. Construction and Building Materials, 274, 122051. https://doi.org/10.1016/j.conbuildmat.2020.122051

Assi, L. N., Deaver, E., Ziehl, P., & Rupnow, T. (2021). Molarity effect of alkali activator on the geopolymerization process and strength development of fly ash-based geopolymers. Construction and Building Materials, 272, 121653. https://doi.org/10.1016/j.conbuildmat.2020.121653

Jang, J. G., Ahn, Y., & Park, S. M. (2022). Effect of activator molarity on the early-age reaction kinetics and mechanical properties of low-calcium fly ash-based geopolymer. Journal of Materials Research and Technology, 17, 3496–3505. https://doi.org/10.1016/j.jmrt.2022.01.170

Abdel-Gawwad, H. A., Abo-El-Enein, S. A., & Heikal, M. (2023). Effect of curing regimes on the compressive strength development of fly ash-based geopolymer. Case Studies in Construction Materials, 18, e02123. https://doi.org/10.1016/j.cscm.2023.e02123

Davidovits, J. (2020). Geopolymer Chemistry and Applications (5th ed.). Institut Géopolymère.

Santosa, E., Raka, P. B., & Handoko, A. (2023). Pemanfaatan Abu Tempurung Kelapa sebagai Bahan Pozzolan pada Beton. Jurnal Teknik Sipil, 20(2), 109–118.

Nur Ihfansyah, M., & Teguh, A. (2024). Pengaruh Abu Tempurung Kelapa terhadap Kuat Tekan Paving Block Beton. Jurnal Teknisia, 9(1), 45–52.

Adajar, M. A., & Bernal, S. A. (2020). Performance of concrete with coconut shell ash as partial cement replacement. Geomate Journal, 18(69), 15–22.

Rovnaník, P., Bayer, P., & Kusák, I. (2021). Mechanical and microstructural properties of ambient-cured geopolymer composites. Construction and Building Materials, 274, 122051.

ASTM C 618 – 03 Standart Specification for Coal Fly Ash and Raw or Calcined Natural Pozzoland for Use as a Mineral Admixture in Concrete, American Standard Testing and Material.

ASTM C 33-81 Standard specifications for concrete aggregates. United States.

ASTM C 33-97 Standar Specification for Concrete Aggregates. United States.

Badan Standar Nasional Indonesia. 1990. Agregat Beton, Mutu dan Cara Uji. SNI 03-1750. Indonesia.

Badan Standar Nasional Indonesia. 2011. Tata Cara Pembuatan dan Perawatan Benda Uji Beton di Laboratorium. SNI 2493-2011. Indonesia.

Badan Standar Nasional Indonesia. 2013. Persyaratan Beton Struktural Untuk Bangunan Gedung. SNI-2847-2013. Indonesia.

Wijaya, O.A., (2018). Pengaruh Penambahan Superplasticizer Pada Beton geopolimer berbahan dasar NaOH 14 M Molar terhadap kuat tekan dan porositas.

Xu, H., & Van Deventer. J.S.J. (2000). The geopolymerisation of alumino-silicate minerals. International journal of mineral processing, 2000, 59.3; 247-266

Sariman, S., Setiawan, A., Syahrul, S., & Adum, A. (2023). Variasi Abu Terbang dan Abu Sekam Padi Terhadap Kuat Tekan Beton Geopolymer. Jurnal Ilmiah Ecosystem, 23(3), 807-815

Downloads

Published

2025-09-30