Substitusi Agregat Halus Dengan Serbuk Kaca Terhadap Kuat Tekan dan Kuat Lentur Beton dengan Penambahan Zat Epoxy

Authors

  • Rino Dwi Laksono Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa
  • Syahrul Sariman Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa
  • Arman Setiawan Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa

Keywords:

Glass Powder, Epoxy, Compressive Strength, Flexible

Abstract

The construction world has developed very quickly in recent years. Concrete is one example. Over time many new innovations have emerged to strengthen the concrete itself and the means of reducing waste that exist in the community. The purpose of this study was to obtain the influence of partial substitution of  sand with glass powder by 40%, 50%, 60% and the addition of epoxy substances by 10% on thestrength of concrete bending press.  44 samples were made, including 20 normal concrete samples and 24 variation concrete samples. Concrete will be soaked for 28 days. Testing of compressive strength, and bending strength of concrete is carried out when the life of the test object reaches 28 days. The results of this test show that variation concrete has a compressive strength, and a higher bending strength of concrete than normal concrete.  The more use of glass powder on the concrete mixture, the more decreased the  compressive strength,  and the strength of its lentur. However, the compressive strength and flexural strength of variation concrete are still higher than the normal compressive and flexural strength of concrete.  Epoxy does not have a great impact on concrete containing glass powder.

References

Ayu Suhartini1), A. S. S. G. A. H. (2014). Pengaruh Penambahan Tumbukan Limbah Botol Kaca Sebagai Bahan Subtitusi Agregat Halus Terhadap Kuat Tekan Dan Kuat Lentur Beton. Pengaruh Penambahan Tumbukan Limbah Botol Kaca Sebagai Bahan Subtitusi Agregat Halus Terhadap Kuat Tekan Dan Kuat Lentur Beton, 2(N0.1), 66–80. https://jurnal.unismabekasi.ac.id/index.php/bentang/article/view/363

Lisantono, A., & Tandean, E. (2019). Pengaruh Epoxy Terhadap Sifat Mekanik Beton Dengan Bahan Tambah Kaca Sebagai Substitusi Agregat Halus. In Jurnal Rekayasa Konstruksi Mekanika Sipil (JRKMS) (pp. 75–84). https://doi.org/10.54367/jrkms.v2i2.521

P, F. E. G., & Tanzil, G. (2013). Variasi Bubuk Kaca Substitusi Sebagian Pasir Dengan. 1(1), 68–73.

Pane, F. P., Tanudjaja, H., & R.S. Windah. (2015). Pengujian Kuat Tarik Belah Dengan Variasi Kuat Tekan Beton. Jurnal Sipil Statik, 3(5), 313–321.

Putri, N. P., Kusumawati, D. H., Rohmawatii, L., & Fmipa, F. (2014). Sifat Mekanik Beton Polimer Epoksi dengan Pengisi Partikel Nanokalsit-silika Mechanical Properties of Polymer Concrete Epoxy Filler Particles with Nanocalcite-silica. 2(2), 38–41.

Rikardus, J. J. S. T. Y. (2014). Pengaruh Penggunaan Serbuk Kaca Sebagai Bahan Substitusi Agregat Halus Terhadap Sifat Mekanik Beton. Jurnal Teknik Sipil, 13(1), 1–11. https://doi.org/10.24002/jts.v13i1.639

Downloads

Published

2023-01-10