Pemanfaatan Limbah Styrofoam Sebagai Bahan Tambah Terhadap Karakteristik Campuran Aspal Buton Tipe CPHMA Dengan Perendaman Berulang

Dedi Arham Al Anzari; Abd. Rahim Nurdin; Nurhadijah Yunianti

Authors

Dedi Arham Al Anzari Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa
Abd. Rahim Nurdin Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa
Nurhadijah Yunianti Program Studi Teknik Sipil Fakultas Teknik Universitas Bosowa

Keywords:

CPHMA, Sterofoam, Repeated Immersion

Abstract

Cold Paving Hot Mix Asbuton is a mixture of asbuton consisting of aggregate, granular asbuton, rejuvenator and other added ingredients mixed with cold heat. Hot and cold mixed asphalt asphalt is a ready-to-use asphalt mixture product that is used as a pavement surface layer for low traffic volume roads. The purpose of this study was to obtain the effect of adding styrofoam to the Marshall characteristics of the CPHMA type Buton asphalt mixture with repeated immersion. This study uses styrofoam waste with the addition of 5%, 10%, and 15%. Samples of test objects made as many as 33 samples, 6 normal samples and 27 samples of variation. Treatment of the specimens was carried out with repeated immersion variations of 6, 12, and 18 days. The manufacture of test objects is hot mixed and refers to the 2018 Bina Marga Specifications, the test is carried out with the Marshall test equipment. The results of this test indicate that the effect of Styrofoam waste as an additive in the CPHMA type Buton asphalt mixture with repeated immersion can cause the value of density, stability, MQ, and VFB to decrease. While the value of flow, VMA, and VIM increased

References

Direktorat Bina Marga. (2016). Spesifikasi Khusus Interm Campuran Beraspal Panas dengan Asbuton Lawele, Republic Indonesia Kementerian Pekerjaan Umum, Jakarta. https://binamarga.pu.go.id/index.php/nspk/detail/spesifikasi-khusus-interim-5-seksi-63-campuran-beraspal-panas-dengan-asbuton-lawele-skh-6631

Ditjen Bina Marga. (20130. Spesifikasi Khusus Interim Seksi 6.3 Asbuton Campuran Panas Hampar Dingin CPHMA, Jakarta: Kementerian Pekerjaan Umum. https://binamarga.pu.go.id/v3/assets/files/NSPK/2013_SKh-.6.3.3%20Cold%20Paving%20Hot%20Mix% 20Asbuton.pdf

Ditjen Bina Marga. (2015). Pedoman Pelaksanaan Asbuton Campuran Panas Hampar Dingin Cold Pavement Hot Mix Asbuton, CPHMA, Jakarta: Pekerjaan Umum Dan Perumahan Rakyat.

https://binamarga.pu.go.id/index.php/nspk/detail/pedoman-pelaksanaan-asbuton-campuran-panas-hampar-dingin-cold-paving-hot-mix-asbuton-cphma

Elsa Eka Putri. (2020). Studi Penggunaan Limbah Styrofoam Pada Perkerasan Aspal Porus, Universitas Andalas. https://doi.org/10.31869/rtj.v3i2.1705

Kementerian Pekerjaan Umum. (2013). Pedoman Spesifikasi Teknis Campuran Beraspal dengan Asbuton, Jakarta. https://binamarga.pu.go.id/index.php/nspk/detail/pedoman-spesifikasi-teknis-campuran-beraspal-dengan-asbuton

Mayssara A. Abo Hassanin Supervised, Affiifi. (2014). Pemanfaatan Limbah Karet Ban dan Plastik Pet (Polyethylene Terephthalate) Menjadi Aspal Sintetis dengan Oli Bekas Sebagai Pelarut. Paper Knowledge. Toward a Media History of Documents, 5–33

Menteri Pekerjaan Umum. (2006). Peraturan Menteri Pekerjaan Umum Nomor: 35/Prt/M/2006 Tentang Peningkatan Pemanfaatan Aspal Buton Untuk Pemeliharaan dan Pembangunan Jalan. https://pustaka.pu.go.id/biblio/peraturan-menteri-pekerjaan-umum-nomor-35prtm2006-tentang peningkatan-pemanfaatan-aspal-buton-untuk-pemeliharaan-dan-pembangunan-jalan/593D6

Noris, T.G. (2017). Analisa Pemanfaatan Limbah Styrofoam Sebagai Bahan Subtitusi ke dalam Aspal Penetrasi 60/70 Terhadap Karakteristik Campuran Aspal Porus, Universitas Negeri Surabaya.

https://ejournal.unesa.ac.id/index.php/rekayasa-teknik-sipil/article/view/17440/15868

Rahim, A., Wihardi, M., & Muhiddin, A.B. (2012). Pengaruh Air Laut Terhadap Karakteristik Perkerasan Aspal Porus yang Menggunakan Asbuton Sebagai Bahan Pengikat. Jurnal Teknik Sipil, Universitas Hasanuddin Makassar. https://pasca.unhas.ac.id/jurnal/files/ff24f7402b2f239b45264078f9a64e28.pdf