Pengaruh Serbuk Besi Dari Limbah Bubut Sebagai Subtitusi Agregat Halus Dan Variasi Tawas Sebagai Subtitusi Agregat Kasar Terhadap Kuat Tekan Beton
DOI:
https://doi.org/10.56326/jptsk.v1i2.3024Keywords:
Lathe Waste, Alum, Compressive StrengthAbstract
This study aims to analyze the relationship of compressive strength of concrete with iron powder mixture from lathe waste by 10% and alum variation by 0%, 5%, 10%, 15%, 20% and 25%. The method of this study is to compare the compressive strength of normal concrete with the compressive strength of concrete variations of iron powder and alum. The percentage of iron powder of 10% and the percentage of alum of 0% experienced a decrease in the compressive strength value against normal concrete by 8.7%, which used an iron lathe of 10% and alum of 5% experienced a drastic decrease against the compressive strength of normal concrete by 30.4%. It can be concluded that 10% iron lathe impersonation as a substitution of fine aggregates and variations of alum of 0%, 5%, 10%, 15%, 20% and 25% as substitutions of coarse aggregates lead to a decrease in the compressive strength value of concrete
References
Antoni dan Nugraha, 2007, Teknologi Beton, Andi Offest: Yogyakarta
Antono, A. (1995). Bahan Konstruksi Teknik Sipil. Penerbit Universitas Atma Jaya, Yogyakarta.
Bayu Pratam, Akhmad Suryadi dan Ir. Gerrad Apanno, 2020, Penambahan Serat Limbah Bubut Besi Terhadap Kuat Tarik dan Kuat Lentur Beton Normal, JOS MRK Volume 01.01, Manajemen Rekayasa Konstruksi, Jurusan Teknik Sipil, Politeknik Negeri Malang. http://jos-mrk.polinema.ac.id/
Badan Standardisasi Nasional. (2000). SNI 03-2834-2000 Tata Cara Pembuatan Rencana Campuran Beton Normal. Jakarta: Badan Standardisasi Nasional.
Ir. Tri Mulyono, MT. 2003, Teknologi Beton, ANDI Offset: Yogyakarta
Julianto, 2017, Pengaruh Penambahan Limbah Bubut Besi Terhadap Kuat Tekan Beton, Jurnal UIB Repostory, Universitas Internasional Batam. https://scholar.google.com
Kardiyono, Tjokrodimuljo, ME. 1996, Teknologi Beton. Yogyakarta: Fakultas Teknik UGM
Laboratorium Struktur Dan Bahan, Buku Panduan Laboratorium Struktur Bahan Dan Jalan, Universitas 45 Makassar
Pt. Semen Tonasa, Spesifikasi semen portland, sementonasa.ac.id
Puja Nifta Hadi Dan Agustinus Agus Setiawan, 2019, Studi Eksperimental Penambahan Limbah Bubut Sebagai Bahan Subtitusi Parsial Agregat Halus Terhadap Kuat Tekan Beton, Jurnal Widyakala Volume 06.01, Universitas Pembangunan Jaya, Tangerang Selatan, Indonesia. https://scholar.google.com/scholar
Soelarso Dan Sulmahdi Darwis, 2011, Pengaruh Penambahan Abu Sekam Padi (ASP) dan Tawas Pada Kuat Tekan Beton F”17,5 mpa, Jurnal Teknika Volume 07.01, Universitas Sultan Ageng Tirtayasa.
Tjokrodimuljo, ME. 2007, Teknologi Beton, Biro Penerbit Teknik Sipil: Universitas Gadjah Mada
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Febryansah Febryansah, Arman Setiawan, Hijriah Hijriah
This work is licensed under a Creative Commons Attribution 4.0 International License.